What Does Thermal Paste Do? How to Apply Thermal Paste?

Like any electronic device, computers need maintenance at regular intervals. Users may experience performance degradation if they disrupt these maintenance. The most important reason for this decrease in performance is that the thermal paste begins to dry / finish. So what is thermal paste for? Why is thermal paste so effective when it comes to computer performance?

If you want to clean your computer or have your computer cleaned through computer scientists, you have heard of thermal paste. However, if you have not figured out exactly what this does, you may be wondering what thermal paste does. In addition, you may know what this product is basically for and wonder how to do the thermal paste renewal process. Our guide to find answers to all the questions you have in mind about thermal paste is for you!

What is Thermal Paste and What Does It Do?

The biggest enemies of electronic devices are high temperatures and liquids. We can say that thermal paste actually struggles with heat, one of these biggest enemies. So what is thermal paste and what is it for? How does it combat temperatures? Let’s take a closer look at this together.

As it is known, processors are one of the most important hardware for computers. The fact that the processors exceed a certain performance causes the temperature to increase. Therefore, a helper is needed to reduce this temperature in order for the computer to work properly and the hardware not to be damaged.

This is where thermal paste comes in. Computer users often think that thermal paste lowers the temperature directly. In fact, this is not exactly the case. Because the thermal paste is rubbed between the processor and the processor cooler. This results in heat transfer between the processor and the processor cooler.

In other words, the thermal paste exchanges heat between the processor and the heatsink, preventing the processor from overheating. Therefore, thermal paste is of great importance for the health of the processor. Because the high temperature causes the processor to burn. This is one of the situations that a computer user will not want.

Does Thermal Paste Affect the Performance of the Computer?

At the beginning of our guide, we said that high temperature is one of the biggest enemies of electronic devices. The biggest reason for this is that high temperatures cause performance loss in most electronic devices.

Therefore, as the simplest answer to the question of what does thermal paste do, it would be correct to say that it increases the performance of the computer. Computers should be cleaned every 6 months, at worst, 1 a year. The reason for this is that the computer fans are clogged as a result of a certain use. In addition, the life span of most brands of thermal paste is 6 months. In other words, as a result of 6 months of use, the heating problem will start on your computer because the thermal paste life is exhausted.

High temperatures will begin to bother you primarily when using your computer. Especially laptop users can be very uncomfortable because of the high temperature. In addition, high temperature can cause a significant performance loss and then hardware loss in long-term use.

Therefore, you should not disrupt the maintenance times of your computer. If you delay your computer maintenance, you are likely to experience performance loss due to high temperatures.

Is the Brand of Thermal Paste Important?

We know how important thermal paste is for processors. Therefore, if the thermal paste is so important for computer users, the question of whether the thermal paste brand used is also important. There are many brands’ thermal pastes on the market that appeal to every budget. So what is the difference between thermal pastes? Why are some thermal pastes sold at a price of 10-15 TL while others are sold at 300-400 TL prices?

We’re sure you’ve questioned this question if you, too, have attempted to clean your computer. First of all, the choice of brand is very important because the thermal paste comes into direct contact with the processor. Pastes of 10-15 TL sold in the market can damage the processor as well as not being long-lasting.

Apart from this, the more you increase your budget when choosing a thermal paste brand, the more performance you will get. At this point, we recommend that you do not prefer very cheap thermal pastes. Because most thermal pastes that are sold cheaply are designed both in terms of the duration of use and the z that it can give to the processor.it will annoy you with searches.

Thermal pastes of medium price level, such as the Arctic MX-4 and Cooler Master HTK-002, will generally please you. However, if you say that you can allocate more budget to thermal paste, you can look at better quality models.

How to Apply Thermal Paste?

Many computer users, especially laptop users, are afraid to clean their computers. Most users consider this process to be a very laborious and risky one. For this reason, they usually have computer scientists do the cleaning.

In fact, the computer cleaning process is not as laborious or risky as it is thought. Of course, there are some points to be considered in the cleaning process, such as the process to be applied to every electronic device. As long as you perform your transactions by paying attention to these points, you will not have any problems.

Well, let’s say you open your computer/laptop case. You dismantled the fans, cleaned them. Then you can question where and how to apply thermal paste. Thermal paste, as we mentioned in our article, is applied on the processor. However, there are some points that you should pay attention to when applying the thermal paste application process. These:

How To Apply Thermal Paste
  • First you need to remove the heatsink of your processor. You should then clean your processor’s cooler and any drying or scattered thermal paste on your processor. You can use a microfiber cloth or paper towel for this cleaning process.
  • Once you are sure that there is no residue left on your processor from your old thermal paste, you can begin thermal paste application.
  • Thermal paste is a spreading liquid. Therefore, you need to make sure that you use enough thermal paste when applying the thermal paste renewal process. Because if you apply more thermal paste than necessary, the paste will spread around when you close the grill of your processor. This will damage your processor or motherboard. Therefore, you should be careful not to use more or less paste than necessary.
  • Keeping a brush or card with you when trying to refresh your thermal paste will make the process easier. Because we mentioned that thermal paste should be applied in sufficient quantities. For this, distributing the thermal paste using a brush or card will give you an idea of the amount of thermal paste you apply.
  • After carefully applying your thermal paste, you can put the grille of your processor back on. At this point, what you need to pay attention to is to place the grill on the processor in one move. This is because if you move the grill on the processor, the thermal paste you apply will dissipate.
  • Once your grid is fully seated, you can finish the process by reseating the necessary screws on the motherboard.

Does Thermal Paste Lower the Temperature?

We have already mentioned the effect of thermal paste especially on the processor temperature. If the temperature of your processor is starting to rise, it’s probably time to refresh your thermal paste.

Does the temperature of the processor drop directly after renewing the thermal paste? Many computer users underestimate the power of thermal paste. These users question how much a paste can affect the temperature or performance of the computer.

But the performance of the thermal paste greatly misleads these users. Because if it’s time to refresh your thermal paste, your computer can reach temperatures between 85-95 degrees under load. This can be very dangerous for the health of the computer with long-term use.

However, if you have done your thermal paste maintenance, these temperature values will fall to 60-75 degrees. The most important factor that will affect the temperature of your computer here will be the model of your processor and the brand of thermal paste you use. Because some processors do not fall below a certain temperature due to reasons caused by the computer manufacturer and processor manufacturer.

So if you’re sure your fans are working properly and your processor temperature isn’t dropping even though you’ve refreshed your thermal paste, it’s probably because of your processor model or computer manufacturer. In such cases, high temperatures do not affect these processors much, as manufacturers take the necessary precautions and carry out tests.

Is it normal for the temperature to increase after renewing the thermal paste?

We have already mentioned that there are some points to be considered during the thermal paste renewal process. Computer users who do not pay attention to these points should not be able to avoid the thermal paste renewal process.they may encounter some problems.

At the beginning of these problems is the increase in temperature after renewing the thermal paste. There are basically 2 reasons for this problem. First of all, if the thermal paste you use is a cheap and poor quality paste, it can cause this problem to your life. Therefore, we strongly recommend that you use a proven thermal paste model so that you do not have problems after thermal paste renewal.

Apart from this, another reason that causes this problem is that you apply more thermal paste than necessary. In the title How to apply thermal paste, we have indicated that you should not apply thermal paste more than necessary. If you apply more thermal paste than necessary, your processor will operate at higher temperature values than you received before the procedure.

If you encounter such a problem, you should immediately close your computer and open your computer case again. Because you should clean the thermal paste you apply without further damage to your processor. After cleaning the thermal paste, you can refresh your thermal paste by paying attention to the steps we described above.

Is Thermal Paste the Only Variety?

When you decide to shop, you want to master all the information about the product you are going to buy and its varieties. Computer users also go in search of information when they want to buy thermal paste. One of the most curious issues of the users is “Are there any types of thermal paste”.

First of all, in the Turkish market, thermal pastes that have become ordinary are usually sold. However, thermal pastes obtained as a result of various mixtures, especially silver and aluminum, are also sold abroad to better insulate heat. These pastes show better cooling performance than ordinary thermal pastes.

If you have this type of paste and want to apply it to your processor, you need to be extra careful. Because such pastes can cause heavier damage to the processor and motherboard than other pastes due to their content. Therefore, if you have a thermal paste reinforced with silver or aluminum, you need to be very careful not to touch the thermal paste to a place outside the processor during the thermal paste renewal process.

Apart from this, nanoparticle thermal pastes are also sold in our country. In these thermal pastes, there are some particles, such as high-end pastes sold abroad. These particles greatly improve the performance of the thermal paste. However, the particles increase the price of the paste as well as increase the performance.

Coolermaster Mastergel Maker Nanoparticle Thermal Paste

A normal paste is sold in the price range of 50-150 TL, while nanoparticle thermal pastes are sold in the price range of 200-400 TL. If you have a very powerful system, that is, if you need a powerful cooling system, choosing nanoparticle thermal pastes will provide better performance.

What Does Thermal Paste Do: Overall Evaluation

People who do not have a full command of computer hardware and processes are wondering what thermal paste is and what it does. In general, thermal pastes have an important role in the performance of computers and the health of the processor. Therefore, it is of great importance for computer users to maintain thermal paste at certain periods for their computers.

Computer users who want to perform the thermal paste renewal process can easily perform this process by paying attention to the steps we have described in our guide. However, if you do not fully understand the steps or if you are not sure about it, it is better to get support from a computer scientist. Because the wrong thermal paste application processes will cause great damage to the processor and motherboard.

Our thermal paste guide we have prepared for you ends here. In this guide, we have tried to answer questions such as what is thermal paste for you, what is it for, what is its importance for the computer. You can share with us the questions you have about thermal pastes and what you want to add to our guide from the comment section below.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button